Emergency tyre puncture repair 

Emergency tyre puncture repair solution to be used in the unfortunate event of sustaining a puncture offering a temporary method of repair giving you extended mobility.

The product is used in the same way as products supplied with modern vehicles supplied with no spare wheel.  Once the tyre has suffered a puncture you remove the valve core with the tool supplied then push the pouch over the valve then slowly squeeze the contents through the valve. Refit the valve core and inflate to 30psi then drive the vehicle for a couple of miles to allow the product to start to distribute itself and apply the protective coating. Air pressure from within instantly forces the product into the puncture wound to create a flexible seal offering extended mobility allowing continuation of your journey.  After a couple of miles, it's recommended to check the tyre pressure to ensure the tyre is sealed.

Drivesafe emergency tyre puncture repair solution is a water-soluble environmentally friendly product which can be washed out from the tyre with just water allowing an inspection to be carried out and a repair to relevant industry standards can be undertaken.  Therefore saving the driver the cost of a new tyre.

Drivesafe emergency tyre puncture repair solution is available in a 400ml pouch suitable for cars, vans, trailers, caravans. For large high-performance cars, vans & motorhome, 4X4's and SUV's recommend the use of 2 pouches per wheel due to the larger surface area within the tyre the product has to cover

Advantages over current products supplied with modern vehicles are these products are most often latex based which renders the tyre scrap once used, therefore a typical puncture can be costly for the driver as a replacement tyre is required along with a replacement canister. These types of products have been criticised in the past due to not being able to wash the product out of the tyre and their poor sealing capabilities.

Drivesafe emergency puncture tyre repair sealant offers a more effective seal giving the driver extend mobility with NO adverse effect upon the tyre, The product can be simply washed out with the tyre examined for any damage and if safe to do so the tyre can be repaired to the relevant industry standards.

Drivesafe emergency puncture tyre repair is suitable for use with vehicles equipped with tyre sensors.

Tyre Sensor Safe

Remove tyre the tyre valve core with the tool supplied and allow the tyre to completely deflate

The additional tyre valve supplied can be used on either the metal bolt in valves and the standard rubber tyre valves. Can be used as an extension for ease of application.

Push the pouch spout over the extension valve and then squeeze the contents into the tyre slowly, roll up the pouch from the bottom to ensure contents flow into the tyre.  Refit the tyre valve core and reinflate to 30 psi maximum.